Panasonic KX-TDA50 - Page 235

2.8 [2] System
PC Programming Manual 235
Default
40 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When called party does not answer—Day, Lunch, Break, Night
2.10.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination—Intercept
Destination—When called party does not answer—Day, Lunch, Break, Night
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.7 DISA (Direct Inward System Access)
1.9.11 Intercept Routing
DISA—Disconnect Timer after Intercept
Specifies the length of time that an intercepted DISA call rings at the intercept routing destination
before being disconnected.
Default
60 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.7 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a CO-to-CO line call on a DISA line.
(Selecting "0" enables the caller to prolong the CO-to-CO line call without restriction.)
Default
10