2.8 [2] System
PC Programming Manual 243
Receiving Dial Inter-digit Timer—DID (KX-TDA100/KX-TDA200/KX-TDA600
only)
Specifies the length of time between digits when receiving a DID number from a public network. The
call will be redirected to a PBX operator when this timer expires.
Default
10 s
Value Range
0–30 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.16.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
Receiving Dial Inter-digit Timer—TIE
Specifies the length of time between digits when receiving a dialed number from a TIE line. The call
will be redirected to a PBX operator when this timer expires.
Default
10 s
Value Range
3–30 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.15.1 [9-1] TIE Table
Feature Manual References
1.13.13 PRIVATE NETWORK FEATURES
PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension
returns to idle status.
Default
5 s
To Next Page
Loading...
