Panasonic KX-TDA50

2.8 [2] System
246 PC Programming Manual
System Wireless—PS Out of Range Timer
When the destination of an incoming call is a PS, specifies the length of time the PBX searches for
the PS before setting its status to Out of Range.
If "0" is assigned, the timer is controlled by the cell station.
Default
0 s
Value Range
0 s, 4 s, 8 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.8.17 [2-9] System Options—System Wireless—Out of Range Registration
Feature Manual References
1.13.17 Private Network Features—PS Roaming by Network ICD Group
SVM—Recording Time (KX-TDA50 only)
Specifies the maximum length of a message recorded by the SVM feature.
Default
120 s
Value Range
1–600 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.9 [4-1-7] Wired Extension—Simplified Voice Message (KX-TDA50 only)
2.10.16 [4-2-5] Portable Station—Simplified Voice Message (KX-TDA50 only)
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM—Dial Tone Continuous Time (KX-TDA50 only)
Specifies the length of time that dial tone 3 is heard after all messages stored by the SVM feature for
an extension are finished playing.
Default
5 s