Panasonic KX-TDA50

2.8 [2] System
PC Programming Manual 249
Feature Manual References
1.17.3 Tenant Service
1.17.5 Time Service
2. Break—Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when 2. Break—Break 1–3
Start—Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
2.8.6 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
1.17.3 Tenant Service
1.17.5 Time Service
2. Break—Break 1–3 End—Hour, Minute
Specifies the end time for each break period. Times can only be set when 2. Break—Break 1–3
Start—Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
2.8.6 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
1.17.3 Tenant Service
1.17.5 Time Service