Panasonic KX-TDA50 - Page 267

2.8 [2] System
PC Programming Manual 267
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This
feature can be used during a call or while hearing a reorder tone after the caller hangs up.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
None
Message Waiting Set / Cancel / Call Back
Specifies the feature number used to set or cancel Message Waiting, or call back the caller.
Default
*70
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.8.8 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
FWD/DND Set / Cancel: Call from CO & Extension
Specifies the feature number used to set or cancel FWD/DND for incoming CO line and intercom
calls.
Default
*710