Panasonic KX-TDA50

2.4 Tool
PC Programming Manual 47
• Enter the path and name of the file in the text field.
• Click the "…" button to navigate to and select the target file.
3. In Destination File Name, enter the desired name for the converted file.
The destination file name or location must be different from the source file name.
If another file with the same name already exists in that location, it will be automatically
overwritten.
• Enter the path and name of the file in the text field.
If you do not specify a path, the new file will be saved in the same directory as the source file.
• Click the "…" button to navigate to and select the target file.
4. Click OK.
If the convert operation was successful, a message will be displayed.
5. Click OK.