Panasonic KX-TDA50

2.10 [4] Extension
PC Programming Manual 553
Default
Not Stored
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/
DND (Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External),
Group Fwd (Internal), Account, Conference, Terminate, EFA, Call Park, Call Log, Log-in/Log-out,
Hurry-up, Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, CLIR,
COLR, Headset, Time Service - Automatic/Manual, Check In, Check Out, Two-way Record, Two-way
Transfer, LCS, Voice Mail Transfer, NDSS, CTI, SDN (KX-TDA100/KX-TDA200/KX-TDA600 only)
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
Programming Manual References
2.10.18 [4-3] DSS Console—Flexible Button—Flexible button Data Copy
Feature Manual References
1.6.3 Flexible Buttons
Parameter Selection (for Single CO)
Specifies the CO line to be accessed.
Default
1
Value Range
For KX-TDA50:
1–16
For KX-TDA100/KX-TDA200:
1–128
For KX-TDA600:
1–640
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
Programming Manual References
2.10.18 [4-3] DSS Console—Flexible Button—Flexible button Data Copy
Feature Manual References
1.3.14 CO Line Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.