2.10 [4] Extension
562 PC Programming Manual
Ext. No. / Floating Ext. No. (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600
only)
Specifies the floating extension number of the PDN extension corresponding to the SDN button.
Note that the extension specified here must have a PDN button registered for the SDN button to
function.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.4.6 DIL (Direct In Line)
Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 (with the KX-TDA50/KX-
TDA100/KX-TDA200) or 5000 (with the KX-TDA600) One-touch Dialing buttons for extensions and
DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
2.10.17 [4-3] DSS Console—Flexible Button
Programming Manual References
None
Feature Manual References
1.12.4 One-touch Dialing
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 2.15.4 [9-4] NDSS Key
Table can be specified here.
To Next Page
Loading...
