2.11 [5] Optional Device
580 PC Programming Manual
Feature Manual References
None
CO-CO with DISA—Transfer by DTMF "#" (Optional SD Card Required)
Specifies whether an outside party such as a cellular phone can transfer a CO line call to an extension
within the PBX by dialing "#" + extension number.
Default
Disable
Value Range
Disable: "#" is ignored if dialed.
Enable (as "Flash"): The current CO line call will be placed on hold, then transferred to the extension
whose number is entered.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a CO line caller to return to the DISA top menu by pressing " " while hearing a ringback,
reorder, or busy tone. If disabled, retrying the call is possible by pressing " ".
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
To Next Page
Loading...
