2.12 [6] Feature
PC Programming Manual 613
SMDR for External Hotel Application 2—Printing Message 1–8
Specifies the text of the message output on SMDR when this Printing Message is selected from an
extension.
The "%" character can be used in a message, and requires a number to be entered in its place when
the message is selected from an extension. This character can be used a maximum of seven times
in a Printing Message.
Default
Not stored.
Value Range
Max. 16 characters
Maintenance Console Location
2.12.9 [6-8] Hotel
Programming Manual References
2.17.1 [11-1] Main
Feature Manual References
1.13.11 Printing Message
1.16.1 SMDR (Station Message Detail Recording)
To Next Page
Loading...
