Panasonic KX-TDA50

2.14 [8] ARS
PC Programming Manual 625
Removed Number of Digits
Specifies the number of leading digits to remove from the user-dialed number.
Default
0
Value Range
0–15
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Modify Command
Specifies the commands to modify the user-dialed number to access the carrier. For details of each
command, see the Feature Manual.
Default
CH
Value Range
Max. 16 characters (consisting of 0–9, *, #, C, P, A, G, I and H)
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialed number
by specifying "C" in Modify Command on this screen.
Default
Not stored.