Panasonic KX-TDA50 - Page 693

3.2 Feature Programming References
PC Programming Manual 693
• 2.7.20 [1-1] Slot—IP-GW Port—Connection
• 2.7.24 [1-1] Slot—IP-Extension Port—Connection
• 2.8.8 [2-6-1] Numbering Plan—Main—Features
– Idle Line Access (Local Access)
– Trunk Group Access
– Single CO Line Access
• 2.8.12 [2-7-2] Class of Service—External Call Block
• 2.9.1 [3-1-1] Trunk Group—TRG Settings—Main—Line Hunting Order
• 2.9.2 [3-1-2] Trunk Group—Local Access Priority
• 2.10.5 [4-1-4] Wired Extension—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 2.10.13 [4-2-3] Portable Station—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 2.10.17 [4-3] DSS Console—Flexible Button
– Type
– Parameter Selection (for Single CO)
– Parameter Selection (for Group CO)
• 2.14.1 [8-1] System Settings—ARS Mode
• 2.16.1 [10-1] CO Line Settings—CO Name
Feature Manual Reference
1.3.14 CO Line Access
CO Line Call Limitation
• 2.8.11 [2-7-1] Class of Service—COS Settings—TRS—Extension-CO Line Call Duration
Limit
• 2.8.17 [2-9] System Options—Option 2—Extension - CO Call Limitation—For Incoming Call
• 2.9.1 [3-1-1] Trunk Group—TRG Settings—Main
– CO-CO Duration Time
– Extension-CO Duration Time
• 2.13.5 [7-5] Miscellaneous—Dial Digits Limitation After Answering—Dial Digits
Feature Manual Reference
1.3.15 CO Line Call Limitation
Conference
• 2.8.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
– Unattended Conference—Recall Start Timer
– Unattended Conference—Warning Tone Start Timer
– Unattended Conference—Disconnect Timer
• 2.8.11 [2-7-1] Class of Service—COS Settings—TRS—Transfer to CO
• 2.8.17 [2-9] System Options—Option 3
– Confirmation Tone—Tone 4-1 : Start Conference