Panasonic KX-TDA50

2.6 Help
72 PC Programming Manual
Numbering
Q
If I delete the extension number of a Portable Station, and then turn the
Portable Station off and back on again, it does not function correctly.
A • Do not delete the extension number of the Portable Station, as this information is
necessary for it to operate.
Q
How do I change the extension number of a wired extension?
A • Change the extension number of the target port to the new number, and click Apply.
Next, set the port to OUS status, and then back to INS status.
Q
I changed the extension number of a wired extension while the extension was
engaged in a call, but the display still shows the previous extension number.
A • The extension number will not change while the extension is in use. When the
conversation is finished, set the port to OUS status, and then back to INS status.
Q
How do I change the extension numbering plan from 3-digit numbers to 4-digit
numbers?
A • Perform the following steps:
1. Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
2. Enter a 2-digit number in Leading Number, or change No. of Additional Digits
from "x" to "xx".
For more details, see What is the procedure to modify the Numbering Plan?.
Q
How do I set a 3-digit numbering plan?
A • There are 2 methods of creating a 3-digit numbering plan, using 2.8.8 [2-6-1]
Numbering Plan—Main:
1. Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example: Leading Number = 10; No. of Additional Digits = x
In this example, extension numbers 100 to 109 can be used.
2. Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example: Leading Number = 1; No. of Additional Digits = xx
In this example, extension numbers 100 to 199 can be used.
For more details, see What is the procedure to modify the Numbering Plan?.
Q
What is the procedure to modify the Numbering Plan?