2.6 Help
74 PC Programming Manual
Saving Modified Data
A • Perform the following steps:
1. Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
2. Change the value in the Dial cell of the desired feature.
3. Click Apply.
Q
I cannot change a feature number.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
• A feature number
•An extension
• A Dial setting (see 2.15.1 [9-1] TIE Table)
• Quick Dialing (see 2.8.9 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q
How do I change the code used to access another PBX?
A • Perform the following steps:
1. Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
2. Select the Other PBX Extension tab.
3. Change the value in the Dial cell of the desired feature.
4. Click Apply.
Q
I cannot change an Other PBX Extension code.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
• A feature number
•An extension
• A Dial setting (see 2.15.1 [9-1] TIE Table)
• Quick Dialing (see 2.8.9 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q
I cannot change a feature number on the B/NA DND Call Feature screen.
A • The number you are trying to store is already being used by another call feature.
Please choose a different number.
Q
How do I prevent extension numbers being automatically assigned to a newly
installed card?
A • Change New Card Installation—Automatic Extension Number Set for Extension
Card in the 2.7.32 [1-3] Option screen from "Automatic" to "Manual".
Q
Modified settings have not been updated in the PBX.
A •Click Apply or OK in the sub-menu screen.
Q
Modified settings are not saved even when I press the Apply button.
A • To save the system data files, choose Save from the File menu.
To Next Page
Loading...
