Panasonic KX-TDA50

2.7 [1] Configuration
PC Programming Manual 93
SLT Power Supply (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the voltage that enables an SLT to activate the Message Waiting lamp. This setting is only
available with MSLC/EMSLC cards.
Default
85 V
Value Range
85 V, 145 V
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Card Property
Programming Manual References
None
Feature Manual References
1.11.3 Message Waiting
Optional Equipment (KX-TDA100/KX-TDA200/KX-TDA600 only)
Indicates whether an Extension Caller ID card is mounted on the SLC8 card (reference only). This is
only available with SLC8 cards.
Default
Current status
Value Range
None, Caller ID
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Card Property
Installation Manual References
For KX-TDA100/KX-TDA200:
2.5.6 EXT-CID Card (KX-TDA0168)
For KX-TDA600:
2.7.6 EXT-CID Card (KX-TDA0168)
Programming Manual References
None
Feature Manual References
None