Panasonic KX-UT133

4.5.2.4 SIP Service Domain
Service Domain
Description Specifies the domain name provided by your phone system dealer. The
domain name
is the part of the SIP URI that comes after the "@" symbol.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference SIP_SVCDOMAIN_n (Page 250)
4.5.2.5 SIP Source Port
Source Port
Description Specifies the source port number used by the unit for SIP
communication.
Value Range 1024–49151
Note
• You cannot specify here the same port number as any of the
port numbers in [Channel 1–25] in 4.3.6.3 External RTP
Port (if they are configured). In addition, you cannot specify a
port number that is 1 greater than a port number specified in
[Channel 1–25].
• The available
channel number varies depending on the type of
the unit being used.
• The SIP port number for each line must be unique.
• You cannot specify the same port number as the port number
specified in [Web Server Port] in 4.4.4.1 Web Server
Settings.
Default Value 5060 (for Line 1)
5070 (for Line 2)
5080 (for Line 3)
5090 (for Line 4)
5100 (for Line 5)
5110 (for Line 6)
Configuration File Reference SIP_SRC_PORT_n (Page 249)
4.5.2.6 SIP Authentication
Authentication ID
Description Specifies the authentication ID required to access the SIP server.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Document Version 2013-03 Administrator Guide 109
4.5.2 SIP Settings [Line 1]–[Line x]