Panasonic KX-UT133

IP Phone (Priority)
Description Indicates the priority value of the phone using LLDP (reference only).
Value Range 0–7
Default Value Not applicable.
PC (VLAN ID) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description Specifies the VLAN ID of the PC when the LLDP feature is enabled.
Value Range 0–4094
Default Value 0
Configuration File Reference LLDP_VLAN_ID_PC (Page 204)
PC (Priority) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description Specifies the priority number of the PC when the LLDP feature is
enabled.
Value Range 0–7
Default Value 0
Configuration File Reference LLDP_VLAN_PRI_PC (Page 205)
4.3.2.3 VLAN Settings
Enable VLAN
Description Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
• You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE8021X".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "
IEEE8021X" > "VLAN"
> "LLDP". Therefore, if "Yes" is specified for both "VLAN" and
"LLDP", the VLAN-related settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference VLAN_ENABLE (Page 196)
84 Administrator Guide Document Version 2013-03
4.3.2 Ethernet Port Settings