Default Value No
Configuration File Reference SIP_DETECT_SSAF_n (Page 264)
4.5.3 VoIP Settings
This screen allows you to change the VoIP settings that are common to all lines.
4.5.3.1 RTP Settings
RTP Packet Time
Description Selects the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
Default Value 20
Configuration File Reference RTP_PTIME (Page 238)
Minimum RTP Port Number
Description Specifies the lowest port number that the unit will use for RTP packets.
Note
• If port numbers are specified in [Channel 1–25] in
4.3.6.3 External RTP Port, this setting is ignored and the
corresponding external RTP port is enabled.
• The available
channel number varies depending on the type of
the unit being used.
Document Version 2013-03 Administrator Guide 115
4.5.3 VoIP Settings
To Next Page
Loading...
