Panasonic KX-UT133

Default Value
N
ONHOOK_TRANSFER_ENABLE
Value Format Boolean
Description Specifies whether transfer operations are permitted while on-hook.
Value Range
• Y (Enable On-hook Transfer)
• N (Disable On-hook Transfer)
Default Value
Y
DISCONNECTION_MODE
Value Format Integer
Description Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
Value Range 1–2
– 1: Mode1 (ROT)
– 2: Mode2 (BT)
Default Value 1
TONE_LEN_DISCONNECT_HANDSET
Value Format Integer
Description Specifies the duration, in seconds, that a disconnect tone will be heard
when the other party ends a call and the handset is being used.
Value Range 1–15
Default Value 10
TONE_LEN_DISCONNECT_HANDSFREE
Value Format Integer
Description Specifies the duration, in seconds, that a disconnect tone will be heard
while in hands-free mode when the other party ends a call.
Value Range 1–15
Default Value 3
KEY_PAD_TONE
Value Format Boolean
210 Administrator Guide Document Version 2013-03
5.5.1 Call Control Settings