Panasonic KX-UT133

Value Range Max. 40 characters
Note
• You cannot leave this field empty.
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper
-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT (Page 200)
4.3.4.2 HTTP Authentication
Authentication ID
Description Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Value Range Max. 127 characters
Default Value Not stored.
Authentication Password
Description Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Value Range Max. 127 characters
Default Value Not stored.
4.3.4.3 Proxy Server Settings
Enable Proxy
Description Selects whether to use the proxy server.
Value Range
• Yes
• No
Default Value No
Document Version 2013-03 Administrator Guide 89
4.3.4 HTTP Client Settings