Panasonic KX-UT133

Configuration File Reference SIP_AUTHID_n (Page 248)
Authentication Password
Description Specifies the authentication password used to access the SIP server.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference SIP_PASS_n (Page 249)
4.5.2.7 DNS
Enable DNS SRV lookup
Description Selects whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
Value Range
• Yes
• No
Note
• If you select [Yes],
the
unit will perform a DNS SRV lookup for
a SIP registrar server, SIP proxy server, SIP outbound proxy
server, or SIP presence server. If you select [No], the unit will
not perform a DNS SRV lookup for a SIP registrar server, SIP
proxy server, SIP outbound proxy server, or SIP presence
server.
Default Value Yes
Configuration File Reference SIP_DNSSRV_ENA_n (Page 255)
SRV lookup Prefix for UDP
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using UDP.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sip._udp.
Configuration File Reference SIP_UDP_SRV_PREFIX_n (Page 256)
110 Administrator Guide Document Version 2013-03
4.5.2 SIP Settings [Line 1]–[Line x]