Panasonic KX-UT133

ANNEX_G_STUN_SERV_PORT
Value Format Integer
Description Specifies the port number of the STUN server for the CPE to send
Binding Requests.
Note
• This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
Value Range 1–65535
Default Value 3478
ANNEX_G_STUN_USER_ID
Value Format String
Description Specifies the STUN username to be used in Binding Requests (only if
message integrity has been requested by the STUN server).
Note
• If the
value for this setting is an empty string, the CPE must not
send STUN Binding Requests with message integrity.
Value Range Max. 256 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
ANNEX_G_STUN_PASS
Value Format String
Description Specifies the STUN password to be used in computing the
MESSAGE-INTEGRITY attribute used in Binding Requests (only if
message integrity has been requested by the STUN server). When
read, this parameter returns an empty string, regardless of the actual
value.
Value Range Max. 256 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
ANNEX_G_STUN_MAX_KEEP_ALIVE
Value Format Integer
190 Administrator Guide Document Version 2013-03
5.3.6 Management Server Settings