Panasonic KX-UT133

3.1.4 Reset Web ID/Password
Reset Web
ID/Password resets all the IDs and passwords required for users and administrators to access the
Web user interface (® see Access Levels (IDs and Passwords) in 1.1.6.3 Before Accessing the Web
User Interface) to their factory defaults. You can perform this operation from the unit.
To perform Reset Web ID/Password
1. Press
Setting
or
Setup
.
2. Press [#][7][3][9].
3. Press [ ] or [ ] to select "Yes" to reset the Web ID/Password, and then press [ENTER].
All the IDs and passwords are reset, and the unit will restart.
Notice
• For security reasons, it is recommended that the passwords are set again immediately (® see
4.4.2 Administrator Password or 4.4.3 Change User Password).
3.1.5 Sound Quality (
KX-UT113/KX-UT123/KX
-UT133/KX-UT136
only)
You can select the parameter of the unit that you are using from "0" or "1". The default setting is "0".
"1" is a special technical parameter. If you select "1", handset sound becomes more stable but there is a risk
of echo occurring.
To assign a parameter to the unit
1. Press
Setting
or
Setup
.
2. Press [#][2][7][6].
3. Press [
] or [ ] to select the parameter ("0" or "1"), and then press [ENTER].
Document Version 2013-03 Administrator Guide 57
3.1.5 Sound Quality (KX-UT113/KX-UT123/KX-UT133/KX-UT136 only)