Panasonic KX-UT133

Description Specifies the duration of the hold recall timer. If set to "0", the function
is disabled.
Value Range 0–240 (0: Disable)
Default Value 60
AUTO_ANS_RING_TIM
Value Format Integer
Description Specifies the number of seconds a phone in Auto Answer mode will ring
before a conversation is established automatically when it receives a
call.
Value Range 0–15
Default Value 5
RINGING_OFF_SETTING_ENABLE
Value Format Boolean
Description Specifies whether incoming call ringing can be turned off for the phone.
If disabled, users cannot prevent incoming calls from ringing.
Value Range
• Y (Enable Ringing Off setting)
• N (Disable Ringing Off setting)
Default Value
Y
AUTO_CALL_HOLD
Value Format Boolean
Description Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
Value Range
• Y (Enable Auto Call Hold)
• N (Disable Auto Call Hold)
Default Value
Y
REDIALKEY_CALLLOG_ENABLE
Value Format Boolean
Description Specifies whether the call log is displayed when the Redial button is
pressed while on-hook.
Value Range
• Y
(Displays outgoing call log by pressing the Redial button.)
• N (Not display call log by pressing the Redial button.)
Document Version 2013-03 Administrator Guide 209
5.5.1 Call Control Settings