Panasonic KX-UT133

Configuration File Reference VM_NUMBER_n (Page 242)
Enable Shared Call
Description Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
• Availability depends on your phone system.
Value Range
• Yes
• No
Note
• If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will
control the line by using a standard signaling method.
Default Value No
Configuration File Reference SHARED_CALL_ENABLE_n (Page 243)
Synchronize Do Not Disturb and Call Forward
Description Selects whether to synchronize the Do Not Disturb and Call Forward
settings, configured
via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
• Even if
you select [Yes], this feature may not function properly
if your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
• You cannot set both [Enable Shared Call] and [Synchronize
Do Not Disturb and Call Forward] to [Yes] at the same time.
Value Range
• Yes
• No
Default Value No
Configuration File Reference FWD_DND_SYNCHRO_ENABLE_n (Page 244)
128 Administrator Guide Document Version 2013-03
4.6.2 Call Control [Line 1]–[Line x]