Default Value Not stored.
Configuration File Reference USER_PASS (Page 170)
New Password
Description Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Note
• When
a
user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
Configuration File Reference USER_PASS (Page 170)
Confirm New Password
Description Specifies the same password that you entered in [New Password] for
confirmation.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Note
• This value must be the same as the value entered in [New
Password].
Default Value Not stored.
Configuration File Reference USER_PASS (Page 170)
4.4.4 Web Server Settings
This screen allows you to change the Web server settings.
98 Administrator Guide Document Version 2013-03
4.4.4 Web Server Settings
To Next Page
Loading...
