FWD_DND_SYNCHRO_ENABLE_n
Parameter Name Example FWD_DND_SYNCHRO_ENABLE_1, FWD_DND_SYNCHRO_ENABLE_2
,
…, FWD_DND_SYNCHRO_ENABLE_6
Value Format Boolean
Description Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured
via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
• Even if
you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
• You cannot set both "SHARED_CALL_ENABLE_n" and
"FWD_DND_SYNCHRO_ENABLE_n" to "Y" at the same time.
Value Range
• Y (Enable Do Not Disturb/Call Forward synchronization)
• N (Disable Do Not Disturb/Call Forward synchronization)
Default Value
N
Web User Interface Reference Synchronize Do Not Disturb and Call Forward (Page 128)
RESOURCELIST_URI_n
Parameter Name Example RESOURCELIST_URI_1, RESOURCELIST_URI_2,
…,
RESOURCELIST_URI_6
Value Format String
Description Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
• When
the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons (KX-UT133/KX-UT136/KX-UT248 only).
Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Default Value Empty string
Web User Interface Reference Resource List URI (Page 129)
244 Administrator Guide Document Version 2013-03
5.7.1 Call Control Settings
To Next Page
Loading...
