5. Focus/Zoom – Using AF
132
Magnify the AF Area Position ([AF-Point Scope])
This magnifies the focus point when the AF mode is [ ], [ ], or [ ]. (In
other AF modes, the center of the screen is magnified.)
You can check focus and observe an enlarged subject as with a telephoto
lens.
1 Register [AF-Point Scope] to the Fn button. (Fn Buttons: 472)
2 Enlarge the AF area position by pressing and holding the Fn button.
• When the screen is enlarged, pressing the shutter button halfway re-acquires
focus in a small central AF area.
• When the screen is enlarged, turn or to adjust the magnification.
Use for more detailed adjustments.
• When the screen is enlarged, [AFC] changes to [AFS].
• When the following functions are being used, AF-Point Scope does not work:
– Video recording/[Post-Focus]
– [6K/4K Pre-Burst]
– [Miniature Effect] ([Filter Settings])
– [Multiple Exposure]
• You can change the display method of the magnified screen:
[] [ ] [AF-Point Scope Setting] ([AF-Point Scope Setting]: 557)
To Next Page
Loading...
Need help?
General
