15. Wi-Fi/Bluetooth – Wi-Fi Connections
663
[Via Network]
Connect the camera and an external device through the wireless access
point.
1
Select the method for connecting to a wireless access
point.
Settings: [WPS (Push-Button)]/[WPS (PIN code)]/[From List]
• After selecting [Via Network] once, the camera will connect to the
previously-used wireless access point.
To change the wireless access point used for connection, press [DISP.] and
change the connection destination.
• Check the operating instructions and settings of the wireless access point.
To Next Page
Loading...
Need help?
General
