5. Focus/Zoom – Selecting the AF Mode
146
[225-Area]
The camera selects the most optimal AF area to focus from 225 areas.
When multiple AF areas are selected, all selected AF areas will be brought
into focus.
When the focus mode is set to [AFC], ensuring that the subject stays within
the 225 areas during recording will ensure the subject stays in focus.
Specify the [AFC] Start Point
When the focus mode is set to [AFC], you can specify at which area to start
[AFC].
1 Set the focus mode to [AFC]. (Selecting the Focus Mode: 126)
2 Set [AFC Start Point (225-Area)] to [ON].
• [ ] [ ] [AFC Start Point (225-Area)] [ON]
3 Press [ ] to display the AF mode selection screen.
4 Select [ ] and then press 4.
• After performing Steps 1 and 2, the icon changes from [ ] to [ ].
5 Press 3421 to move the AF area to the start point.
• You can also move the AF area by touching.
• To return the position back to the center, press [DISP.].
6 Press .
To Next Page
Loading...
