15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone
645
[Remote Wakeup]
Even when the camera is turned off, the smartphone can be used to start
the camera and record images, or check the recorded images.
Getting started:
1 Connect to a smartphone using Bluetooth. (Connecting to a Smartphone
(Bluetooth Connection): 616)
2 Enable [Remote Wakeup] on the camera.
• [ ] [ ] [Bluetooth] [Remote Wakeup] [ON]
3 Set the camera on/off switch to [OFF].
4 On the smartphone, start up “LUMIX Sync”.
Turning On the Camera
1 Select [Remote shooting] in the “LUMIX Sync” home screen.
• (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
• The camera turns on, and automatically connects using Wi-Fi.
Turning Off the Camera
1 Select [ ] in the “LUMIX Sync” home screen.
2 Select [Turn off the camera].
3 Select [Power OFF].
• When you turn on the camera with the smartphone, the status indicator will flash.
• When [Remote Wakeup] has been set, the Bluetooth function continues to work
even if the camera on/off switch is set to [OFF], so the battery will drain.
To Next Page
Loading...
Need help?
General
