17. Connecting to Other Devices – Printing
703
Printing
If you connect the camera to a printer that supports PictBridge, you can
select pictures on the camera’s monitor and then print them.
Getting started:
• Turn on the camera and printer.
• Set the print quality and other settings on the printer.
1
Play back the card that contains the picture you want to
print.
≥Press [ ].
≥After pressing [ ], press 34 to select [Card Slot 1] or [Card
Slot 2], and then press or .
•
The card for printing cannot be changed after connecting to the printer.
2
Connect the camera and printer with the USB
connection cable. (USB port: 690)
3
Press 34 to select [PictBridge(PTP)] and then press
or .
To Next Page
Loading...
Need help?
General
