14. Menu Guide – [Playback] Menu
605
[Playback] menu ([Add/Delete Info.])
[Protect]
[Rating]
[Single]/[Multi]/[Cancel]
You can set protection for images so that they will not be deleted by mistake.
However, if you format the card, the protected images will also be deleted.
• For information about how to select images (How to Select an Image(s) in the
[Playback] menu: 598)
• Be careful because the [Protect] setting may be disabled on a device other than
this camera.
[Single]/[Multi]/[Cancel]
If you set any of the five different rating levels for images, you can do the following:
• Deleting all images except for those with ratings.
• Play back or show a slide show of images by the rating level.
• Check the rating level in the file details display in operating systems such as
Windows 10, Windows 8.1, and Windows 8. (JPEG images only)
1 Select an image. (How to Select an Image(s) in the [Playback] menu: 598)
2 Press 21 to select a rating level (1 to 5) and then press or .
• When [Multi] is selected, repeat Steps 1 and 2.
• To cancel the setting, set the rating level to [OFF].
To Next Page
Loading...
Need help?
General
