17. Connecting to Other Devices – Storing on a Recorder
699
Storing on a Recorder
By connecting the camera to a Panasonic Blu-ray disc recorder or DVD
recorder, you can store the pictures and videos.
Getting started:
• Turn on the camera and recorder.
• Insert a card into card slot 1.
1
Connect the camera and recorder with the USB
connection cable. (USB port: 690)
2
Press 34 to select [PC(Storage)] and then press or
.
3
Operate the recorder to store the images.
• If [USB Mode] is set to [PC(Storage)] in the [Setup] ([IN/OUT]) menu, the camera
will be automatically connected to the recorder without the [USB Mode] selection
screen being displayed. ([USB]: 590)
• Take care not to turn off the camera while storage is in progress.
• Images such as 4K videos may not be supported depending on your recorder.
• Turn off the camera and disconnect the USB connection cable before removing
the card from the camera. Otherwise, the recorded data may be damaged.
• For the storage and playback procedures, refer to the operating instructions for
the recorder.
To Next Page
Loading...
Need help?
General
