14. Menu Guide – [Setup] Menu
590
[Bluetooth]
[USB]
[Bluetooth] (Connecting to a Smartphone (Bluetooth Connection): 616)
[Send Image (Smartphone)] ([Smartphone]: 652)
[Remote Wakeup] ([Remote Wakeup]: 645)
[Returning from Sleep Mode] (Shortening the Return Time from [Sleep Mode]:
637)
[Auto Transfer] ([Auto Transfer]: 640)
[Location Logging] ([Location Logging]: 643)
[Auto Clock Set] ([Auto Clock Set]: 646)
[Wi-Fi network settings]
[Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points
used to connect the camera to Wi-Fi networks will be registered automatically.
[USB Mode]
[ ][Select on connection]/
[ ][PC(Storage)]/[ ][PC(Tether)]/
[ ][PictBridge(PTP)]
This sets the communication method to be used when the USB connection cable is
connected.
[ ][Select on connection]: Select this setting to select the USB
communication system when connecting to another device.
[ ][PC(Storage)]: Select this setting to export images to a connected PC.
[ ][PC(Tether)]: Select this setting to control the camera from a PC installed with
“LUMIX Tether ”.
[ ][PictBridge(PTP)]: Select this setting when connecting to a printer that
supports PictBridge.
To Next Page
Loading...
