6. Drive/Shutter/Image Stabilizer – [Silent Mode]
240
[Silent Mode]
This disables all operation sounds and light output at once.
The audio from the speaker will be muted and the flash and the AF assist
light will be set to forced off mode.
•
The following settings are fixed:
– [Flash Mode]: [ ] (Forced Flash Off)
– [AF Assist Light]: [OFF]
– [Shutter Type]: [ELEC.]
– [Beep Volume]: [ ] (OFF)
– [AF Beep Volume]: [ ] (OFF)
– [E-Shutter Vol]: [ ] (OFF)
 [ ]  [ ]  Select [Silent Mode]
Settings: [ON]/[OFF]
•
Even when [ON] is set, the following functions light/blink:
– Status indicator
– Charging light/NETWORK connection lamp
– Card access light
– Self-timer light
• Use this function at your own responsibility sufficiently considering the privacy,
portrait, and other rights of subjects.
To Next Page
Loading...
Need help?
General
