5. Focus/Zoom – AF Area Movement Operation
163
Focus on and Adjust Brightness for the Touched Position
([AF+AE])
1 Touch the subject to which you wish to adjust the brightness.
• At the touched position, an AF area that works in the same way as [ ] is
displayed.
This places a point to adjust brightness at the center of the AF area.
2 Pinch out/pinch in to change the AF area size.
• The first touch of [Reset] returns the AF area position to the center. The second
touch returns the size of the AF area to the default.
3 Touch [Set].
• The [AF+AE] area setting is canceled if you touch [ ] (when [ ] or [ ] is
set: [ ]) on the recording screen.
To Next Page
Loading...
