6. Drive/Shutter/Image Stabilizer – [Shutter Type]
243
• To reduce shutter-induced blur, you can set the shutter to release a few seconds
after the shutter button is pressed:
[]  [ ]  [Shutter Delay] ([Shutter Delay]: 530)
• When [ ] is displayed on the screen, recording will be with the electronic
shutter type.
• When a moving subject is recorded using the electronic shutter, the subject may
appear distorted in the picture.
• When you record using the electronic shutter under lighting such as fluorescent
or LED lighting, horizontal stripes may be recorded. In such a case, lowering the
shutter speed may reduce the effect of horizontal stripes.
• When [Silent Mode] is being used, [Shutter Type] is fixed to [ELEC.].
To Next Page
Loading...
Need help?
General
