7. Metering/Exposure/ISO Sensitivity – Manual Exposure Mode
266
• The effects of the set aperture value and shutter speed will not be visible on the
recording screen.
To check the effects on the recording screen, use [Preview]. (Preview Mode:
268)
You can set the preview of the aperture effect and the shutter speed effect to
constantly operate in [M] mode to check the depth of field and movement of the
subject while recording:
[]  [ ]  [Constant Preview] ([Constant Preview]: 566)
• The brightness of the recording screen and of actual recorded images may differ.
Check the images on the playback screen.
• When using a lens with an aperture ring, set the position of the aperture ring to
other than [A] to use the aperture value of the lens.
• Shutter speeds faster than 1/250 of a second are not available when recording
using a flash. (Shutter Speeds for Flash Modes: 312)
• You can customize dial operations:
[]  [ ]  [Dial Set.]  [Assign Dial (F/SS)]/[Rotation (F/SS)] ([Dial
Set.]: 563)
• The recording screen can display an exposure meter indicating the relationship
between aperture value and shutter speed:
[]  [ ]  [Expo.Meter] ([Expo.Meter]: 572)
To Next Page
Loading...
Need help?
General
