7. Metering/Exposure/ISO Sensitivity – ISO Sensitivity
276
Setting Items (ISO Sensitivity)
*1 Default setting. The upper limit can be changed with [ISO Sensitivity (photo)].
*2 Default setting. The upper limit can be changed with [ISO Sensitivity (video)].
• When the following functions are being used, the ISO sensitivity that can be set is
restricted.
– [High Dynamic] ([Filter Settings]): Fixed to [AUTO]
– Other than [High Dynamic] ([Filter Settings]): Up to an upper limit of [3200]
– [Multiple Exposure]: Down to a lower limit of [200], up to an upper limit of [3200]
– [Like709] ([Photo Style]): Down to a lower limit of [200]
– [V-Log L] ([Photo Style]): Down to a lower limit of [400]
– [Hybrid Log Gamma] ([Photo Style]): Down to a lower limit of [400]
– [ ] mode, [6K/4K PHOTO], [Post-Focus]: Up to an upper limit of [12800]
• During video recording, the camera operates as [AUTO]. (When not in [ ] mode)
[AUTO]
The ISO sensitivity is automatically adjusted according to the
brightness.
• Taking picture: Maximum [3200]
*1
• Video recording: Maximum [6400]
*2
[200] to [25600]
The ISO sensitivity is fixed at the selected value.
• You can extend the ISO sensitivity lower limit to [100] by
setting [Extended ISO] ([Extended ISO]: 551) to [ON] in the
[Custom] ([Image Quality]) menu.
To Next Page
Loading...
Need help?
General
