10. Recording Videos – [Focus Transition]
390
7
End Focus Transition.
≥Press [Q].
8
Stop recording.
≥Press the video rec. button once again.
• Maintain the same distance to the subject after setting the focus position.
• The moving speed of focus varies depending on the lens being used.
• While using [Focus Transition], it is not possible to focus on anything other than
the registered focus position.
• Any of the operations below will clear the focus position settings.
– Operating the camera on/off switch
– Zoom operation
– Switching the focus mode
– Switching the recording mode
– Replacing the lens
• When the following functions are being used, [Focus Transition] is not available:
– [Variable Frame Rate]
– [Live Cropping]
• [Focus Transition] cannot be used when using an interchangeable lens that does
not support the focus mode [AFC].
To Next Page
Loading...
