2. Getting Started – Charging the Battery
51
1
Set the camera on/off switch to [OFF].
2
Insert the battery into the camera.
3
Connect the camera USB port and the AC adaptor using
the USB connection cable.
• Check the direction of the terminals and plug in/out straight holding onto the
plug.
(Inserting at an angle can deform the terminal and cause malfunction.)
4
Connect the AC adaptor to an electrical outlet.
• The charging light (A) blinks red and charging begins.
Charging light Indications
(A) Charging light (red)
On: Charging in progress
Off: Charging complete
Flashing: Charging error
To Next Page
Loading...
