2. Getting Started – Charging the Battery
53
Power Supply
When a battery is inserted in the camera then charged with the AC adaptor (supplied),
and the camera is turned on, you can record while supplying power.
• [ ] is displayed in the screen while power is being supplied.
• You can also supply power by using a USB connection cable to connect the
camera and a USB device (PC, etc.).
• The battery cannot be charged while power is being supplied.
• Turn off the camera before connecting or disconnecting the AC adaptor.
• Remaining charge in the battery may decrease depending on usage conditions.
When the battery level is depleted, the camera will turn off.
• If the temperature of the camera rises, [ ] may be displayed, recording may
stop, and some functions may become unavailable temporarily. Wait until the
camera cools down.
• Depending on the power supply capabilities of the connected device, it may not
be possible to supply power.
To Next Page
Loading...
