2. Getting Started – Charging the Battery
55
• Insert the battery into the camera.
• Connect using the USB connection cable of the battery charger (DMW-BTC15:
optional).
• When the camera is on, charging will take longer than when the camera is off.
• Even when connecting with devices that support USB PD, you may not be able
to charge while using the camera.
• If connecting with devices (PC, etc.) that do not support USB PD and turning the
camera on, then this will supply power only.
• Turn off the camera before plugging or unplugging the power plug.
• Remaining charge in the battery may decrease depending on usage conditions.
When the battery level is depleted, the camera will turn off.
• Depending on the power supply capabilities of the connected device, it may not
be possible to supply power.
To Next Page
Loading...
Need help?
General
