14. Menu Guide – [Setup] Menu
588
[Monitor Backlight]/[LVF Luminance]
[Eye Sensor]
[Level Gauge Adjust.]
[AUTO]/[j3] to [i3]
Adjusts monitor/viewfinder luminance.
[AUTO]: The brightness is adjusted automatically depending on how bright it is
around the camera.
• Adjusts the monitor luminance when displaying the monitor, and the viewfinder
luminance when displaying the viewfinder.
• When either [AUTO] is set, or the adjusted value is set to positive side, the usage
period will shorten.
• When [Night Mode] is being used, [Monitor Backlight]/[LVF Luminance] are not
available.
[Sensitivity] [HIGH]/[LOW]
This will set the sensitivity of the eye sensor.
[LVF/Monitor Switch]
[LVF/MON AUTO] (automatic
viewfinder/monitor switching)/[LVF]
(viewfinder)/[MON] (monitor)
This will set the method for switching between the viewfinder and monitor.
• If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will also
switch.
[Adjust.]
Hold the camera in a horizontal position, and press or . The level gauge
will be adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.
To Next Page
Loading...
