14. Menu Guide – [Setup] Menu
596
[System Frequency]
[Pixel Refresh]
[Sensor Cleaning]
[59.94Hz (NTSC)]/[50.00Hz (PAL)]/[24.00Hz (CINEMA)]
* Default setting specifications vary depending on the country or area where the
camera was purchased.
This changes the system frequency of videos that are recorded and played back.
([System Frequency]: 337)
This optimizes the image sensor and image processing.
• The image sensor and image processing are optimized when the camera is
purchased. Use this function when bright spots that do not exist in the subject get
recorded.
• Turn the camera off and on after the pixels are corrected.
Dust reduction to blow off the debris and dust that have affixed to the front of the
image sensor is performed.
• You can use this function when the dust is particularly noticeable.
• Turn the camera off and on after cleaning.
To Next Page
Loading...
Need help?
General
