15. Wi-Fi/Bluetooth – Operating the Camera with a Smartphone
642
• If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the camera
automatically connects to the smartphone via Bluetooth and Wi-Fi when you turn
on the camera.
Start up the “LUMIX Sync ” on the smartphone to connect to the camera.
• When [Auto Transfer] is set to [ON], [Wi-Fi Function] cannot be used.
• If the camera is turned off during image transfer, and the file sending is
interrupted, then turn on the camera to restart the sending.
– If the storage status of unsent files changes, then sending of files may no
longer be possible.
– If there are many unsent files, then sending of all files may not be possible.
• Images recorded with the following functions cannot be transferred automatically:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
To Next Page
Loading...
