17. Connecting to Other Devices – Viewing on a TV
692
• With the default settings, pictures are output at the optimal resolution for the
connected TV.
The output resolution can be changed in [Output Resolution(Playback)].
([HDMI Connection]: 591)
• Depending on the aspect ratio, gray bands may be displayed on the top and
bottom or the left and right of images.
You can change the band color in [Background Color(Playback)] in [HDMI
Connection] of the [Setup] ([IN/OUT]) menu. ([HDMI Connection]: 591)
• HDMI output is not possible if you connect a USB connection cable at the same
time while [USB Mode] is set to [PC(Storage)] or [PictBridge(PTP)].
• If the temperature of the camera rises, [ ] may be displayed, recording may
stop, and some functions may become unavailable temporarily. Wait until the
camera cools down.
• Change the screen mode on your TV if images are displayed with the top or
bottom cut off.
• Depending on the connected TV, 6K/4K burst files may not be played back
correctly.
• Please also refer to the operating instructions for the TV.
To Next Page
Loading...
Need help?
General
