18. Materials – Troubleshooting
739
The recorded image is too bright or dark.
•
Ensure AE Lock is not set where it is not appropriate. (Locking Focus and
Exposure (AF/AE Lock): 272)
Multiple images are recorded at once.
•
When drive mode is set to [ ] (Burst Shot), pressing and holding the shutter
button will take burst pictures. (Selecting the Drive Mode: 183)
• When [Bracketing] is set, then pressing the shutter button records multiple images
while automatically changing the settings. (Bracket Recording: 232)
The subject is not focused properly.
•
Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]? ([Shutter AF]: 557)
– Is [Focus/Shutter Priority] set to [RELEASE]? ([Focus/Shutter Priority]: 554)
– Is AF Lock (Locking Focus and Exposure (AF/AE Lock): 272) set where it is not
appropriate?
The recorded image is blurred. The image stabilizer is not
effective.
•
The shutter speed will become slower and the image stabilizer function may not
work properly when recording in dark places.
In these cases, use a tripod and the self-timer when recording.
To Next Page
Loading...
