18. Materials – Troubleshooting
741
Striping or flicker may appear under lighting such as fluorescent
or LED lighting.
•
This is characteristic of MOS sensors which serve as the camera’s pickup sensors.
This is not a malfunction.
• When using the electronic shutter ([Shutter Type]: 241), lowering the shutter
speed may reduce the effect of the horizontal stripes.
• If flicker or horizontal stripes are noticeable when recording video, this can be
mitigated by fixing the shutter speed.
Either set [Flicker Decrease (Video)] ([Flicker Decrease (Video)]: 536), or fix the
shutter speed with the [ ] mode (Creative Video Mode: 331).
Stripes appear in high ISO sensitivity.
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
Decrease the ISO sensitivity. (ISO Sensitivity: 274)
To Next Page
Loading...
Need help?
General
